讯海轴承/SKF/圆柱滚子轴承/NUP 314 ECM

SKF NUP 314 ECM 圆柱滚子轴承 70×150×35 mm斯凯孚 · 瑞典

圆柱滚子轴承 · 主要尺寸 70×150×35 mm

SKF NUP 314 ECM 圆柱滚子轴承

关键尺寸

70内径 d / mm
150外径 D / mm
35宽度 B / mm

资料下载

SKF NUP 314 ECM 技术参数

尺寸
SKF NUP 314 ECM 尺寸示意图
孔径70 mm
外径150 mm
宽度35 mm
孔径70 mm
外径150 mm
宽度35 mm
内圈挡边直径97.3 mm
外圈挡边直径125.6 mm
内圈滚道直径89 mm
倒角尺寸2.1 mm
活动挡边环的倒角直径2.1 mm
性能
基本额定动荷236 kN
基本额定静负荷228 kN
参考转速4800 r/min
极限转速5600 r/min
SKF 性能等级SKF Explorer
属性
轴承部件整套轴承
轴向位移能力无
列数1
定位特征,轴承外圈不带
孔类型圆柱孔
保持架机削铜
法兰数量,外圈2
挡边数量,内圈1
活套法兰内圈活套法兰
径向游隙CN
公差等级正常
涂层不带
密封不带
润滑剂无
补充润滑功能不带
新产品的指示性碳足迹12.2 kg CO<sub>2</sub>e
挡肩尺寸
SKF NUP 314 ECM 挡肩尺寸示意图
隔套直径82 mm
轴挡肩直径100 mm
轴承座挡肩直径137.5 mm
圆角半径2 mm
数据计算
SKF 性能等级SKF Explorer
基本额定动荷236 kN
基本额定静负荷228 kN
疲劳载荷限值29 kN
参考转速4800 r/min
极限转速5600 r/min
最小载荷系数0.15
极限值0.2
计算系数0.6

产品说明

Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and one integral flange and one loose flange ring on the inner ring, NUP design bearings can locate the shaft axially in both directions. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.

尺寸图纸

SKF NUP 314 ECM 尺寸图纸

点击图纸可放大查看,再次点击关闭。

同尺寸其他型号

以下型号与 SKF NUP 314 ECM 的主要尺寸相同(d 70 × D 150 × B 35 mm),可用于同尺寸替代选型。

同系列相近型号